Premium Laminated White Ash Bent Slat | 210 x 7.5 x 3 cm

The extra-long slat: 210 x 7.5 x 3 cm — the longest piece in our range, in laminated white ash. Length is the entire point. A 210 cm slat spans a bench, a daybed or a wide seat frame in one continuous piece, with no joint anywhere in the visible face — and because it is laminated, the length is achievable at all.

What the dimensions mean

At 210 cm the slat covers spans that solid bending would struggle with: the longer the piece, the harder it is to keep the grain running true through a bend, and the more likely a solid blank is to have figure that runs out. Lamination solves this — thin ash veneers pressed in a mould reach the full length with 1–3% springback and excellent stability, and the grain on the faces runs continuously along the piece.

Specifications

Where this size is used

• Bench seating — long spans with no joint in the visible face.
• Daybeds and chaise — full-length seat elements.
• Wide seat frames — spans that would otherwise need multiple pieces.
• Architectural and interior elements — long curved lines in solid-wood faces.

Why lamination at this length

Three reasons, and all of them are about length. Solid bending at 210 cm demands a blank of exceptional grain straightness — the longer the bend, the more any grain run-out matters — and such blanks are rare and expensive. Lamination uses thin veneers that each bend easily, so the length costs nothing in feasibility. And the cross-layered construction keeps the piece stable across its length, where a long solid element would be more prone to twisting as it moves with humidity.

Logistics

A 210 cm piece is a logistics project as much as a manufacturing one. It is packed crated to support the full length — a long slat that arrives kinked cannot be straightened at your bench — and the freight planning deserves as much attention as the bending. We will talk through packing and shipping when you order, and we confirm the delivery route before the production slot is booked.

Frequently asked questions

Can longer lengths be produced?

Yes — lengths beyond 210 cm are made to order in laminated construction, with feasibility and freight confirmed before quoting.

Is the face solid ash?

The faces are ash; the core is laminated. Edges show the layer lines, which is the signature of the construction.

Why not solid bending at this length?

Solid blanks of this length with the grain straightness a bend demands are rare and costly; lamination reaches the length reliably with better stability.

How is it packed?

Crated to support the full length of the curve, with corner protection — long pieces are a logistics conversation before they are a purchase order.

Summary

210 x 7.5 x 3 cm of laminated white ash — the longest slat in the range, for spans where a joint is unacceptable. Send the drawing with your span and quantity; we confirm feasibility and freight, quote within 24 hours, and deliver prototypes in 7–15 days.

Sizing at a glance

Programme notes

Long pieces are scheduled rather than stocked: the mould, the press cycle and the drying time all scale with length, and the crating is built to the piece. For programmes that need several 210 cm slats — a bench run, for example — we schedule the mould time and the crating together, and confirm the delivery route before the production slot is booked.

Repeat orders reproduce the approved part from the documented mould and process parameters, so a second bench run two years later matches the first. Inspection reports accompany each shipment, with the standard warranty against warping and cracking in transit and use.

Summary

210 x 7.5 x 3 cm of laminated white ash — the longest slat in the range, for spans where a joint is unacceptable. Send the drawing with your span and quantity; we confirm feasibility and freight, quote within 24 hours, and deliver prototypes in 7–15 days.